make the auto check for minZ and maxZ more lenient

This is intended to help create automated prop based targets

Using the coordinates and specified prop models dimensions to create a correctly sized box target.

```lua
createPropTarget({
	name,
	target.prop.coords,
	target.prop.model,
}, options, 2.0)
```

shared/helpers.lua

@@ -956,4 +956,18 @@ end
 function GetEntityForwardVector(entity)
     local heading = math.rad(GetEntityHeading(entity) + 90)
     return vec3(math.cos(heading), math.sin(heading), 0.0)
+end
+
+function adjustMinMaxZ(coord, table)
+    local table = table
+    local adMinZ, adMaxZ = false, false
+    if table.minZ > (coord.z + 0.1) then
+        adMinZ = true
+        table.minZ = (coord.z - 1.05)
+    end
+    if table.maxZ < (coord.z - 0.1) then
+        adMinZ = true
+        table.maxZ = (coord.z + 0.80)
+    end
+    return table.minZ, table.maxZ, adMinZ, adMaxZ
 end

shared/itemcontrol.lua

@@ -2785,11 +2785,12 @@ function openShop(data)
     if (data.job or data.gang) and not jobCheck(data.job or data.gang) then return end
 
     -- If shop has registered coords, limit players from being too far away from it when opening
-    local exploitCheck = triggerCallback(getScript()..":getRegisteredShopLocation", data.shop)
+    local exploitCheck = triggerCallback(getScript()..":getRegisteredShopLocation", data.originShop or data.shop)
     if not exploitCheck then
         print("^3Warning^7: ^2This isn't a registered store^1, refusing call^7")
         return
     end
+
     if not distExploitCheck(exploitCheck) then
         return
     end
@@ -2799,6 +2800,29 @@ function openShop(data)
         lookEnt(data.coords)
         return
     end
+    if not data.items.items[1] then
+        local shopMenu = {}
+        --jsonPrint(data.items)
+        for k, v in pairs(data.items.items) do
+            print(v.header)
+            local clonedTable = cloneTable(data)
+            local itemsTable = v.items or v.Items
+            shopMenu[#shopMenu+1] = {
+                header = v.header or k,
+                txt = countTable(itemsTable).." Products",
+                onSelect = function()
+                    clonedTable.originShop = data.shop
+                    clonedTable.shop = data.shop.."_"..k
+                    clonedTable.label = data.items.label.." - "..(v.header or k)
+                    clonedTable.slots = #itemsTable
+                    clonedTable.items.items = itemsTable
+                    openShop(clonedTable)
+                end,
+            }
+        end
+        return openMenu(shopMenu, { header = data.items.label, canClose = true, })
+    end
+
 
     for i = 1, #InvFunc do
         local inv = InvFunc[i]
@@ -2865,8 +2889,15 @@ function registerShop(name, label, items, society, coords)
     for i = 1, #InvFunc do
         local inv = InvFunc[i]
         if isStarted(inv.invName) then
-            inv.registerShop(name, label, items, society)
-            debugPrint("^6Bridge^7: ^2Registering ^5"..inv.invName.." ^3Store^7:", name, "^4Label^7: "..label, coords and "- ^4Coord^7: "..formatCoord(coords) or "NO COORD SET")
+            if not items[1] then
+                for k, v in pairs(items) do
+                    inv.registerShop(name.."_"..k, label.." - "..(v.header or k), v.items, society)
+                    debugPrint("^6Bridge^7: ^2Registering ^5"..inv.invName.." ^3Store^7:", name.."_"..k, "^4Label^7: "..label.." - "..(v.header or k), coords and "- ^4Coord^7: "..formatCoord(coords) or "NO COORD SET")
+                end
+            else
+                inv.registerShop(name, label, items, society)
+                debugPrint("^6Bridge^7: ^2Registering ^5"..inv.invName.." ^3Store^7:", name, "^4Label^7: "..label, coords and "- ^4Coord^7: "..formatCoord(coords) or "NO COORD SET")
+            end
             break
         end
     end

shared/targets.lua

@@ -252,7 +252,7 @@ function createEntityTarget(entity, opts, dist)
     -- Store the target entity for later cleanup.
     targetEntities[#targetEntities + 1] = entity
 
-    -- if force target off, use jim_bridge buiilt in target functions
+    -- if force target off, use jim_bridge built in target functions
     if Config.System.DontUseTarget then
         exports.jim_bridge:createEntityTarget(entity, opts, dist)
         debugPrint("^6Bridge^7: ^2Creating new ^3Entity ^2target with ^6jim_bridge ^2for entity ^7"..entity)
@@ -324,8 +324,7 @@ end
 ---}, 2.0)
 ---```
 function createBoxTarget(data, opts, dist)
-
-    -- if force target off, use jim_bridge buiilt in target functions
+    -- if force target off, use jim_bridge built in target functions
     if Config.System.DontUseTarget then
         debugPrint("^6Bridge^7: ^2Creating new ^3Box ^2target with ^6jim_bridge ^7"..data[1])
         return exports.jim_bridge:createZoneTarget(data, opts, dist)
@@ -336,6 +335,13 @@ function createBoxTarget(data, opts, dist)
         local script = targetFunc[i]
         if isStarted(script.targetName) then
             debugPrint("^6Bridge^7: ^2Creating new ^3Box ^2target with ^6"..script.targetName.." ^7"..data[1])
+            if data[5].minZ or data[5].maxZ then
+                local adMinZ, adMaxZ
+                data[5].minZ, data[5].maxZ, adMinZ, adMaxZ = adjustMinMaxZ(data[2], { minZ = data[5].minZ, maxZ = data[5].maxZ })
+                if adMinZ or adMaxZ then
+                    print("^5Debug^7: ^2Auto adjusted ^7'^4"..data[1].."^7' ^2minZ and maxZ because ^1they weren't set correctly ^2remove or fix them for this target")
+                end
+            end
             local target = script.boxTarget(data, opts, dist)
             boxTargets[#boxTargets + 1] = target
             return target
@@ -344,6 +350,45 @@ function createBoxTarget(data, opts, dist)
     return nil
 end
 
+
+function createPropTarget(data, opts, dist)
+    -- Audo create a location based on a coord and a prop models dimensions
+    local width, depth, _ = GetPropDimensions(data[3])
+    local min, max = GetModelDimensions(data[3])
+    local coordAdjustment = data[2] - vec4(0, 0, 1.03, 0)
+    local newData = {
+        [1] = data[1],
+        [2] = coordAdjustment.xyz,
+        [3] = width + 0.1,
+        [4] = depth + 0.1,
+        [5] = {
+            name = data[1],
+            heading = coordAdjustment.w - 90.0,
+            debugPoly = debugMode,
+            minZ = coordAdjustment.z + (min.z) - 0.1,
+            maxZ = coordAdjustment.z + (max.z) + 0.1,
+        }
+    }
+    -- if force target off, use jim_bridge built in target functions
+    if Config.System.DontUseTarget then
+        debugPrint("^6Bridge^7: ^2Creating new ^3Box ^2target with ^6jim_bridge ^7"..data[1])
+        return exports.jim_bridge:createZoneTarget(newData, opts, dist)
+    end
+
+    -- Check for target script and use that
+    for i = 1, #targetFunc do
+        local script = targetFunc[i]
+        if isStarted(script.targetName) then
+            debugPrint("^6Bridge^7: ^2Creating new ^3Box ^2target with ^6"..script.targetName.." ^7"..data[1])
+            local target = script.boxTarget(newData, opts, dist)
+            boxTargets[#boxTargets + 1] = target
+            return target
+        end
+    end
+    return nil
+end
+
+
 -------------------------------------------------------------
 -- Circle Zone Target Creation
 -------------------------------------------------------------
@@ -382,7 +427,7 @@ end
 --- ```
 function createCircleTarget(data, opts, dist)
 
-    -- if force target off, use jim_bridge buiilt in target functions
+    -- if force target off, use jim_bridge built in target functions
     if Config.System.DontUseTarget then
         debugPrint("^6Bridge^7: ^2Creating new ^3Sphere ^2target with ^6jim_bridge ^7"..data[1])
         return exports.jim_bridge:createZoneTarget(data, opts, dist)
@@ -429,7 +474,7 @@ end
 ---```
 function createModelTarget(models, opts, dist)
 
-    -- if force target off, use jim_bridge buiilt in target functions
+    -- if force target off, use jim_bridge built in target functions
     if Config.System.DontUseTarget then
         debugPrint("^6Bridge^7: ^2Creating new ^3Model ^2target with ^6jim_bridge^7")
         return exports.jim_bridge:createModelTarget(models, opts, dist)